DIY Chargers for any Tablescape [Reversible too!]

Easy DIY Chargers for whatever tablescape! Stain them unlike colours to brand them reversible together with role them for Easter, Christmas & Thanksgiving!

Tablescapes are 1 of my favourite ways to decorate each season. They are exclusively in that location for an evening, together with truthfully, I exclusively laid them upward 3 or 4 times a year, but for the major holidays, but I all the same instruct hence much joy out of sharing a gorgeous table. Most of us cannot afford a giant drawer of napkins together with accessories, but nosotros all the same desire variety. So I endeavor to DIY equally many pieces equally possible, including these slowly DIY wooden chargers.

*This transportation service may comprise affiliate links for your convenience. For to a greater extent than information, delight read my disclosure policy*

Have yous every tried to cutting a perfect circle? It’s non easy! Even amongst a perfect outline pair of scissors together with saws but aren’t meant for rounded edges! But I dreamed of rounded chargers, hence I needed a solution.

When I told my hubby that I wanted to brand reversible chargers, his outset answer was, “why?” When I told him how much coin he would endure saving past times non buying two novel sets of chargers, he managed to come upward up amongst an amazing thought for me #blesshischeapdutchheart. So I’m sharing my hugger-mugger to perfect reversible chargers! 

How to Make DIY Reversible Chargers

Materials Needed to Make Chargers

• Plywood
• Sand paper
• Wood stain (I used dark walnut together with ebony)
• Varnish

Tools Needed to Make Chargers

• Table Saw or circular saw
• Drill
• Kreg Router Table amongst track together with Kreg featherboard, OR
• Scroll Saw

Instructions for DIY Wood Chargers

This is a pretty basic woodworking project. We used our router table, but if yous don’t convey one, i’ll portion other slowly solutions too. The router tabular array is the absolute easiest agency to practise a perfectly circular circle, but it volition also upshot inwards a small-scale circular hole inwards the pump of the charger. The hole volition endure covered past times the plates together with never noticed, but if yous don’t desire the hole, I would advise the bit method below.

Chargers are typically 13″ inwards diameter, hence I started past times cutting my plywood into 14″ past times 14″ squares on the tabular array saw.

Next, yous desire to honour yous pump of your boards past times drawing lead lines from diagonal ends.

Once yous honour the center, drill a hole inwards the center, the same size equally the bolt that runs inwards your router tabular array track. We used the bold from our featherboard (the silvery bolt on the tabular array below).

We used the router tabular array to cutting the forest until nosotros reached our circle, a 7.5inch radius, together with and hence tightened the bolt together with turned the wooden board until the circle was cut.

By tightening the bolt together with belongings the board inwards place, yous are ensuring the yous volition proceed the exact diameter equally yous role the router bit, together with practise a perfect circle.

If yous practise non convey a router tabular array yous tin role a scroll saw, or fifty-fifty a jigsaw to cutting your chargers too. Just describe a perfect 13″ diameter circle together with cutting along the line.

I would strongly advise a scroll saw, equally it volition give yous a nicer finish. Any other saw does non give the same command for rounded edges together with volition probable require a lot of sanding to practise the rounded look.

Once yous convey your perfect circle, sand the top, bottom, together with edges of all of your chargers together with instruct gear upward to stain them together with and hence varnish them.

If yous desire your chargers to endure reversible, consider staining the 2 sides inwards unlike colours, equally I did. You demand to endure careful that the stain does non drip to the other side, equally it volition seep into the forest together with endure hard to sand downward if it does.

I stained our chargers amongst nighttime walnut on 1 side, together with ebony on the other. I dear the await of both together with convey used both sides inwards diverse tablescapes over the past times year!

Our Finished Chargers

Here are a few examples of how I’ve used these DIY chargers inwards our vacation tablescapes throughout the twelvemonth .

Our Easter Tablescape

The Easter tablescape was sum of wood, greenery, together with white decor. The nighttime chargers were perfect betwixt the white tablecloth together with the white dishes.

Our Thanksgiving Tablescape

One of our Thanksgiving tables was filled amongst copper decor together with greenery. The nighttime walnut of the chargers blended perfectly amongst the autumn oranges together with reds decorating the residuum of the table.

Our Christmas Tablescape

This vacation table was 1 of my favourites! It was sum of DIY ideas, from the chargers, to the DIY tabular array runner, together with the painted breadstuff basket. It was sum of beautiful inspiration together with the nighttime chargers were the perfect add-on to this moody table.

DIY Chargers (for whatever tablescape)

Yield:
8

Active Time:
1 hour

Total Time:
1 hour

Difficulty:
Easy

Estimated Cost:
$20

Easy DIY Chargers for whatever tablescape! Stain them unlike colours to brand them reversible together with role them for Easter, Christmas & Thanksgiving! 

Materials

• 
  Plywood


• 
  Sand paper


• 
  Wood stain (We used nighttime walnut together with ebony)

Tools

• 
  Table Saw or circular saw


• 
  Drill


• 
  Scroll saw, OR


• 
  Kreg Router Table amongst track


• 
  Kreg featherboard

Instructions

1. Cut plywood into 14" past times 14" squares on the tabular array saw
2. Find yous pump on each foursquare past times drawing lead lines from diagonal ends.
3. Once yous honour the center, if yous select to role your router table, drill a hole inwards the center, the same size equally the bolt that runs inwards your router tabular array rails from your featherboard.
4. Using a touchstone tape, stair out 7.5" (the radius of your 13" circle) from the center, together with describe a line. Then slide your foursquare plywood board onto the bolt that is inwards the rails pose the knob (we took ours from the Kreg featherboard) on loosely. Slowly motion your board towards the pump level bring down flake on your router table, until yous accomplish your 7.5" radius mark.
5. Once yous flora your perfect 7.5" distance, tighten the knob together with spin the board to a greater extent than or less until a perfect circle forms.
6. Alternatively, yous tin role a scroll saw. Draw a 13" circle onto your wooden foursquare (trace some other charger if yous convey one). Then role the scroll saw to carefully cutting along the drawn circle outline.
7. Sand downward the both sides together with the edges.
8. Stain it amongst your selection of forest stain. We used ebony on 1 side together with nighttime walnut on the other side to brand them reversible.
9. Varnish the forest complete to protect it.

Recommended Products

As an Amazon Associate together with fellow member of other affiliate programs, I earn from qualifying purchases.

• 
  
  
  
  
  
  
  
  
  Kreg Featherboard
  
  
  




• 
  
  
  
  
  
  
  
  
  Kreg Router Table
  
  
  




• 
  
  
  
  
  
  
  
  
  Dark Walnut Stain
  
  
  




• 
  
  
  
  
  
  
  
  
  Ebony Wood Stain
  
  
  

© Lindi @ Love Create Celebrate

Project Type:

Woodworking
/

Category: Holiday together with Seasonal DIYs